Cerlic MultiTracker, Руководство пользователя

Страница: 25 / 43

25
Multi
Tracker
Profile mode
In order to switch between text mode and profile mode, press the button marked . It
is possible to step back and forth with this button without affecting the actual
measurement.
Save a profile
To save a measurement profile, or to perform a new measurement, press , when
doing this, an option to save or restart the measurement will be presented,
There is a short command from the text mode display where it is possible to select
position for storing the measurement profile. Step up with
or down with to
reach desired log position. The postion tag will be shown at the bottom of the display
window. Fig 11 below, shows that the actual profile will be stored at position ”General ”
Fig 11
It is possible to tag each of the 250 log positions with up to 10 alphanumerical
characters. By entering the log position by tag name, all actual information for the stored
measurement may be retrieved.
Alarm values
At delivery the Blanko is preset with the following values; Fluff (1,000mg/l) and Sludge
Blanket (5,000mg/l). Using these values, it is possible to instantly start to measure and
get a picture of the sludge profile. To change the settings please see Threshold 1 for Fluff
and Threshold 2 for Sludge Blanket.