22
Multi
Tracker
Blind zone
Press
to open the menu and select “SETTINGS”. Confirm with
. Step
down with
and select ”Blind zone” with
. To scale the “Blind zone”
span that is shown at profile measurement, step up with
or down with
until desired value.Confirm with
. Exit the menu with
until one
of the two main windows appear (text mode or profile mode).
Measuring mode
In order to define how the levels for fluff and sludge blanket are presented, it is possible
to select if the depth is shown from the surface top down (Depth) or from the bottom
up(Height). To choose between these options perform the following steps;
Press
to open the menu and select ”SETTINGS”. Confirm with
. Step
down with
and select ”MEAS. MODE” with
. Step up with
or
down with
in order to select desired mode. Confirm with
. Exit the
menu with
until one of the two main windos appear (text mode or
profile mode).
Setup
See setup in section for MultiTracker hand controller.
Preferences
See preferences in section for MultiTracker hand controller.
Language
See language in section for MultiTracker hand controller.
Depth Unit
Following units for depth measurements are available; cm, dm, m, inch and ft (with
inches).
Press
to open the menu and step down with
Select.”SETUP” with
. Step down with
and select ”Depth unit”. Confirm with
. Step up
with
or down with
until desired unit (cm, dm, m, in, ft). Confirm
with
. When all settings are done, exit with
until one of the two main
windows appear (text mode or profile mode).
Concentration Units
See Concentration Units in section for MultiTracker hand controller.
Temperature units
See Temperature units in section for MultiTracker hand controller.
Содержание MultiTracker
Страница 1: ...2019 02 05 C84G5EN19 Multi Tracker MultiTracker...
Страница 35: ...35 Multi Tracker Oxygen Solubility chart...
