72
Community :
Set a community string required by the remote host computer that will
receive trap messages or notices send by the system.
IP(1~4) :
Enter the IP addresses of the remote hosts to receive trap messages.
Click
"save"
to save your settings. Click
Reboot button
to activate your changes
8 Configure Advance Setup
8.1 DMZ (This function must be used WISP mode)
DMZ is commonly work with the NAT functionality as an alternative of Virtual Server(Port
Forwarding) while wanting all ports of DMZ host visible to Internet users. Virtual Server rules
have precedence over the DMZ rule. In order to use a range of ports available to access to
different internal hosts Virtual Server rules are needed.
Please click on
Advance -> DMZ
and follow the below setting
Service :
The DMZ default by
“Disable”
. Check Enable radial button to enable DMZ.
Automatic Assignment : Enter Internal IP address of DMZ host and only one DMZ host is
supported.
Static Assignment : Enter external and internal IP address of DMZ host. The function only
external IP to Internal IP address
Click
"save"
to save your settings. Click
Reboot button
to activate your changes
Содержание 100GX-N
Страница 1: ...1 CERIO Corporation 100GX N extreme High Power 11n 150Mbps In Wall PoE Access Point User s Manual ...
Страница 16: ...16 The 100GX N System screen The 100GX N system login default As follows User Name root Password default ...
Страница 61: ...61 Please refer 3 5 Configure Wireless Advanced Setup Explanation ...
