Cerio 100GX-N, Руководство пользователя

Страница: 65 / 95

65
6.11 Repeater AP MAC Filter Setup
Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.

Action: Select the desired access control type from the drop-down list; the options are
Disable, Allow or Reject.

Only Allow List MAC: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “Only Allow List MAC”.

Only Deny List MAC: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “Only Deny List MAC”.
7 System Management
7.1 Configure Management
Administrator could specify geographical location of the system via instructions in this page.
Administrator could also enter new Root and Admin passwords and allow multiple login
methods.
Please click
System -> Management and follow the below settings
1 MAC Access Control is the weakest security approach. WPA or WPA2 security
methods should be used when possible.
2 There are a maximum of 20 clients allowed in this “Enable” List. The MAC
addresses of the wireless clients can be added and removed to the list using the Add
and Remove buttons.