Cerio 100GX-N, Руководство пользователя

Страница: 24 / 95

24

TX Power : You can adjust the output power of the system to get the appropriate
coverage for your wireless network. Specify digit numbers between level 1 to level 9 (the
unit is %) for your environment. If you are not sure which setting to choose, then keep the
default setting level 9 (100%).

RF(on/off) schedule : The 100GX-N can use the schedule control WiFi on or off
function.
Please refer 8.7 Time Policy
HT Physical Mode

Channel Bandwidth : The "20/40” MHz option is usually best. The other option is
available for special circumstances.

Extension Channel : Only for Channel Bandwidth “40” MHz. Select the desired channel
bonding for control.

MCS : This parameter represents transmission rate. By default (Auto) the fastest possible
transmission rate will be selected. You have the option of selecting the speed if
necessary.

Shout GI : Short Guard Interval, by default, it's “Enable”. it's can increase throughput.
However, it can also increase error rate in some installations, due to increased sensitivity
to radio-frequency reflections. Select the option that works best for your installation.

Aggregation :
By default, it's “Enable”. To “Disable” to deactivated Aggregation.
A part of the 802.11n standard (or draft-standard). It allows sending multiple frames per single
access to the medium by combining frames together into one larger frame. It creates the larger
frame by combining smaller frames with the same physical source and destination end points and
traffic class (i.e. QoS) into one large frame with a common MAC header.

Aggregation Frames : The Aggregation Frames is in the range of 2~64, default is 32. It
determines the number of frames combined on the new larger frame.

Aggregation Size :
The Aggregation Size is in the range of 1024~65535, default is
50000. It determines the size (in Bytes) of the larger frame.
Change these settings as described here and click Save button to save your changes. Click
Reboot button to activate your changes. The items in this page is for AP's RF general
settings and will be applied to all VAPs and WDS Link.