Cerio 100GX-N, Руководство пользователя

Страница: 52 / 95

52

Client Isolation : By default, it’s “Disable”. Select “Enable”, all clients will be isolated from
each other, which means they can’t reach each other.

IAPP : Inter Access-Point Protocol is designed for the enforcement of unique association
throughout a ESS(Extended Service Set) and for secure exchange of station's security
context between current access point (AP) and new AP during hand off period.

Maximum Clients : The default value is 32. You can enter the number of wireless clients
that can associate to a particular SSID. When the number of client is set to 5, only 5 clients
at most are allowed to connect to this VAP.

Security Type : Select the desired security type from the drop-down list; the options are
Disable, WEP, WPA-PSK, WPA2-PSK, WPA-Enterprise, WPA2-Enterprise and WEP
802.1X.
※
The Security Type you can refer 3.7 Virtual AP General Configuration

Security Type
5.10 Repeater AP MAC Filter Setup
Continue Virtual AP Setup section. For each Virtual AP setting, the administrator can allow or
reject clients to access each Virtual AP.

Action: Select the desired access control type from the drop-down list; the options are
Disable, Allow or Reject.

Only Allow List MAC: Define certain wireless clients in the list which will have granted
access to the Access Point while the access will be denied for all the remaining clients –
Action Type is set to “Only Allow List MAC”.

Only Deny List MAC: Define certain wireless clients in the list which will have denied
access to the Access Point while the access will be granted for all the remaining clients -
Action Type is set to “Only Deny List MAC”.
MAC Access Control is the weakest security approach. WPA or WPA2
security methods should be used when possible.
There are a maximum of 20 clients allowed in this “Enable” List. The MAC