User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 534 of 825
Ceragon Proprietary and Confidential
To cancel ATPC override, enter the following command in radio view:
radio[x/x]>atpc set override-cancel
Table 113: Radio ATPC CLI Parameters
Parameter
Input Type
Permitted Values
Description
admin
Variable
enable
disable
Enables or disables ATPC mode.
rx-level
Number
-70 - -30
The RSL reference level for the ATPC
mechanism. When ATPC is enabled, it
adjusts the TX power dynamically to
preserve this RSL level.
timeout
Number
0-1800
The amount of time, in seconds, the timer
counts from the moment the radio reaches
its maximum configured TX power until
ATPC override goes into effect.
override
admin
Variable
enable
disable
Enables or disables ATPC override.
override-tx-
level
Number
-50 - 50
The TX power, in dBm, to be used when
the unit is in an ATPC override state. The
range of values depends on the frequency,
MRMC script, and radio type.
The following commands enable ATPC mode and ATPC override for radio carrier 1,
with an RSL reference level of -55, an ATPC override timeout of 15 minutes, and
an override TX level of 18 dBm:
radio[2/1]>atpc set admin enable
radio[2/1]>atpc set rx-level atpc_ref_rx_level -55
radio[2/1]>atpc set override timeout 900
radio[2/1]>atpc override set admin enable
radio[2/1]> atpc set override-tx-level 18
