User Guide for FibeAir® IP-20 All-Outdoor Products, CeraOS 10.5
Page 446 of 825
Ceragon Proprietary and Confidential
13.4
General CLI Commands
To display all command levels available from your current level, press <TAB>
twice. For example, if you press <TAB> twice at the root level, the following is
displayed:
root>
auto-state-propagation ethernet exit multi-carrier-abc
platform quit radio radio-groups
switch-back switch-to wait
Some of these are complete commands, such as
quit
and
exit
. Others constitute
the first word or phrase for a series of commands, such as
ethernet
and
radio
.
Similarly, if you enter the word
“
platform
”
and press <TAB> twice, the first word
or phrase of every command that follows platform is displayed:
root> platform
activation-key configuration if-manager management
security software status
sync unit-info unit-info-file
root> platform
To auto-complete a command, press <TAB> once.
Use the up and down arrow keys to navigate through recent commands.
Use the ? key to display a list of useful commands and their definitions.
At the prompt, or at any point in entering a command, enter the word
help
to
display a list of available commands. If you enter
help
at the prompt, a list of all
commands is displayed. If you enter
help
after entering part of a command, a list
of commands that start with the portion of the command you have already
entered is displayed.
To scroll up and down a list, use the up and down arrow keys.
To end the list and return to the most recent prompt, press the letter
q
.
To ping another network device, enter one of the following commands:
root> ping ipv4-address <x.x.x.x> count <number of echo packets>
packet-size <packet-size>
root> ping ipv6-address <ipv6> count <number of echo packets>
packet-size <packet-size>
The optional
count
parameter determines how many packets are sent. This
parameter can be an integer from 1 to 1000. The default value is 4.
The optional
packet-size
parameter determines the size of each packet, in
bytes. This parameter can be an integer from 64 to 1480. The default value is 64.
The
ping
command is available from all views (e.g., root, interface views, group
views).
