Centurion BENINCA IT24N, Руководство по установке

Страница: 37 / 48

page 34
CP77
N/C contact to
third party alarm
system
From external source
(5V - 12V DC)
(Alarm systems etc.)
(Negative of external
system should be
connected to COM
of controller)
Outputs with associated features

Gate status LED (LED)
External gate status indicator. This output provides a low current drive to light up a LED which
can be used to indicate the gate status remotely.
For instance if the gate is not visible from the intercom handset inside the house, which is used
to communicate with a visitor at the gate and operate the gate, an LED fitted to the intercom,
wired to the LED output on the gate controller, will give the necessary feedback about the status
of the gate.

Courtesy (Pillar) light (LIGHT/LIGHT)
This feature is associated with the LIGHT connections on the controller.
The pillar light circuit has multiple functions:

It operates as a courtesy light and switches on for a preset timed period of two minutes every
time the gate is activated

Pillar Light Control (LIT): It can be turned on permanently by making a contact via a single
pole, single throw switch connected between LIT and COM

Auxiliary wallbox card
 An LED interface, which provides three inputs for switching LEDs, is included with the kit

A typical use would be to connect the controller’s status LED to the interface, and in so doing
ensuring that you are always aware of your gate’s movements. It is also a handy notification
system for power failures, multiple collisions, etc.

In addition, there is an optional anti-tamper switch which can be connected to a third party
alarm. Should the cover be lifted without first deactivating the alarm, the buzzer will sound
warning residents that the device is being tampered with

If a 12 V DC buzzer is used, it can be powered directly from the controller’s 12V output,
eliminating the need for an additional power supply

The external indicator is connected between LIT and COM