Centrometal El-Cm eBasic 12kW, Руководство по установке, эксплуатации и обслуживанию

Страница: 5 / 36

2. Device data
These instructions contain important information about safe
and professional assembly, commissioning and maintenance
of the boiler.
These instructions are for installers who have knowledge for
work with heating installations due to their professionalism and
experience.
2.1 Typology
These instructions are related to the following kind of device :
2.1.1 Statement on compliances
We hereby state that devices are tested in accordance with the
following directives:
2014/35/EU (low voltage directive, LVD)
and 2014/30/EU (electro-magnetic compatibility directive,
EMC).
2.1.2 Regular application
The boiler can be used only for heating the water for heating system
and for indirect use of hot water. To ensure correct use it is
mandatory to comply with instructions for handling, data on the
factory plate and technical data.
2.2 Instructions for mounting
Use only original spare parts of the manufacturer or
spare parts approved by the manufacturer. There shall
not be any responsibility for damages caused by spare
parts which have not been delivered by the
manufacturer
When mounting heating installations keep with the following
instructions
:

Valid regulations in construction industry

Regulations and norms on safety-technical equipment of
heating installations

Changes on the place of mounting according to valid
regulations
propisima
2.3 Instructions for work
When working with heating installation follow next instructions:

Boiler should work in working range up to max temperature
of 80 °C and min pressure of 0.5bar to max pressure of
3.0bar, which should be controlled on regular basis

Boiler should be handled only by adults who are familiar with
instructions and work of the boiler

Do not close safety valve

Inflammatory objects must not be put on the boiler surface
or close to it (within safety distance)

Boiler surface clean only with non-inflammatory products

Inflammatory substances do not keep in the room for boiler
installation (e.g. petroleum, oil, etc. )

During the work no one lid must be open

Keep safe distance in accordance with regulations
2.4 Inhibitors and anti-frost products
It is not allowed to use protective products against frost neither
inhibitors. Id it is not possible to avoid anti-frost protection then
should use anti-frost products allowed for heating installations
.
Anti-frost products :

Reduce lifetime of the boiler and its parts

Reduce heat transmission
2.5
Norms, regulations and standards
This product is in compliance with the following regulations:

EN 50110-1:2013
– Operation of electrical installations -
Part 1: General requirements

EN 55014-1:2017; EN 55014-2:2015
– Electromagnetic
compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission -
Part 2: Immunity - Product family standard

EN 60335-1:2016 Household and similar electrical
appliances - Safety - Part 1: General requirements

EN 61000-3-2:2019 Electromagnetic compatibility (EMC)
- Part 3-2: Limits - Limits for harmonic current emissions

EN 61000-3-3:2014/A1:2020 Electromagnetic
compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public
low-voltage supply systems
2.6
Tools, materials and auxiliary measures
Standard tools for heating installations, water supply and
electric-installations are needed for mounting and maintenance
of the boiler
.
Device data
El-Cm eBasic
6÷40kW
