Centrometal El-Cm eBasic 12kW, Руководство по установке, эксплуатации и обслуживанию

Страница: 15 / 36

DANGER: Life threat from electric shock!

Electric works must be done only by
qualified person

Turn off voltage supply before opening
device and secure it against accidental
turn on

Comply with assembly regulations
5. Electric connecting
5.1 Positions of introducer for the
introduction of the power cable
THREE-PHASE POWER SUPPLY
SINGLE PHASE POWER SUPPLY
Table 5a: Nominal current, required el. fuses and cross-section
of required voltage cables of
6 and 9 kW boilers for three-
phase and single-phase power supply
When connecting boiler on electric installation take
care on connections scheme and connecting plans.
Respect mandatory diameters of cables and fusses
power outside the boiler
This device is manufactured for connection to three-
phase power supply (3N ~ 400/230V 50Hz)
Only devices with nominal power 6kW and 9kW,
where the cross-section of the connecting cable
must be according to Table 5a
Electric connecting
3N ~ 400/230V 50Hz eBasic 6 eBasic 9
I
n[A]
3 × 8,7 3 × 13,1
Fuses [A] 3 × 16 3 × 20
Min. cable cross
section
5×2,5
mm²
5×2,5
mm²
3N ~ 400/230V 50Hz eBasic 12 eBasic 18
I
n[A]
3 × 17,4 3 × 26,2
Fuses [A] 3 × 25 3 × 32
Min. cable cross
section
5×4
mm²
5×4
mm²
1N ~ 230V 50Hz eBasic 6 eBasic 9
I
n[A]
1 × 26,2 1 × 39,3
Fuses [A] 1 × 32 1 × 50
Min. cable cross
section
3×4
mm²
3×6
mm²
eBasic 24 eBasic 30 eBasic 36
3 × 34,8 3 × 43,5 3 × 52,2
3 × 40 3 × 50 3 × 63
5×6
mm²
5×10
mm²
5×10
mm²
Table 5b: Nominal current required el. fuses and cross-
section of required power cables for
three-phase power
supply
Cable gland at the bottom
Image 5: Display of the cable gland position on the boiler
Image 6: Connected cable