CenterVue
DRS Operating Manual
Pg. 33 of 59
General
To enable a wired connection, plug a network cable into the DRS and wait a few seconds. Press
“SET NETWORK” to refresh the network configuration. Most networks do not require the operator
to set the IP address manually
, but in case it’s needed, click on the Manual button and enter the
IP address (mandatory), netmask (mandatory), gateway (optional) and DNS (optional). Then select
“SET NETWORK” (see Figure 34).
Figure 34 - Network/General tab when a private network has been set-up
To enable the DRS to create a private network click on
Private Network
button (see Figure 34).
The Private Network allows the use of the DRS remote viewer without using existing networks. It
can be used both in wired and wireless configuration. To go back and use an existing network click
on
Set Network.
The Private Network always enables the wireless interface.
If the DRS is plugged into an existing network (where another DHCP server is
active), unplug the network cable before enabling the Private Network in order
not to interfere with the existing DHCP server.
The DRS wireless Private Network is compatible with Apple iPad and Microsoft
Windows XP, 7, Vista and 8 (up to version 8.0). Android-based devices and
Windows 8.1 have known limitations that prevent the correct use with the DRS
wireless Private Network.
