CenterVue
DRS Operating Manual
Pg. 8 of 59
5. PREPARING THE DRS
Carefully and thoroughly read paragraph 7 WARNINGS AND PRECAUTIONS before
proceeding with first use.
The test should be performed in conditions of semi-obscurity to facilitate the
dilation of the pupil
To set up your DRS follow these steps:
extract the system from its box;
place the DRS on a suitable electrical table
1
;
connect the power cord provided with the unit to the power inlet (see Figure 2);
optionally connect a compatible printer
1
to any of the USB ports (see Figure 2);
attach the silicon forehead rest (included in the tool box) on the forehead rest frame as
shown in the pictures below (Figure 3 and Figure 4);
Figure 3 - Forehead rest patient side
Figure 4 - Forehead rest rear side
5.1 TIME ZONE SETTING
The first time the DRS is powered on, the operator should set the Time zone: see § 14.4
–
SYSTEM/TIME.
The configuration request will appear every time the DRS is started, until the time zone is set.
1
Not provided with the DRS
