25
10. STORING THE DRILL
When work has been completed, store the drill by proceeding as follows:
10.1)
Depressurise the tank of the
SR5000
coolant unit (see § 4), close the tap (02) on the hose
and disconnect the quick-coupling (03).
10.2)
Carefully clean the drill, particularly in the spindle area, removing machining waste (swarf,
etc.) and any deposits of lubrocoolant.
10.3)
Fully withdraw the spindle.
10.4)
Place the drill and the SR5000 coolant unit in a sealed place free from dust, moisture and
the risk of accidental impact.
For better protection
Cembre
recommends the use of the
VAL LD
metal case designed for
this purpose (see § 3.4), which enables the drill to be inserted thanks to the
DBG-F2
clamping
device, and to be locked in the case. Suitable housings are also provided in this case for the
DBSN
clamping device and the
VAL MPA
tool case.
VAL MPA
DBSN
VAL LD
RAIL DRILL
FIG. 25 - STORAGE CASE
