manualshive.com logo in svg

CEM Discover SP-D, Руководство по эксплуатации

Поделиться
Скачать
CEM Discover SP-D Скачать руководство пользователя страница 59

55 

 

Specifications 
 

Electrical Requirements 

120 VAC (90-140 VAC), 60 Hz, 10A @ 120 VAC; 220/240 VAC (202-250 VAC), 50 Hz, 5A @ 240VAC: Detachable 
Power Cord with U.L., CSA & CE approvals; Variance in line voltage can affect microwave power output. 
 

Safety Features 

Three independent safety interlocks, including interlock monitoring system, plus two independent thermal switches used in 
each instrument to prevent instrument operation and microwave emissions in case of improper attenuator closure or 
misalignment. Instrument complies with HHS standards under 21 CFR, Part 1030.10, Subparts (C)(1), (C)(2), and (C)(3). 
 

Magnetron Frequency 

2455 MHz 
 

Power Output 

300 watts ±10% 

 

Magnetron Protection 

Wave Guide Design (Patent Pending) to protect magnetron from reflected energy, ensuring constant power output. 
 

Microwave Cavity 

Heavy-duty, multi-layer stainless steel 
 

Dimensions (Overall) 

(Discover SP System) 14.2” W x 16.9” D x 11.2” H (36.1 cm x 42.9 cm x 28.4 cm) 
 

Weight 

(Discover SP System) 38 lbs. (17.3 kg) (Shipping Wt. 60 lbs. or 27 kg) 
 

Computer Compatibility 

80C188 on-board computer controls all system functions. System can perform all functions with or without connection to 
external PC. RS 232, 9-Pin, IBM PC compatible. 
 

Internal Diagnostic Software 

BITS System (Built-In Test System) Checks/monitors line voltage, magnetron life, temperature control, status/operation, 
safety interlocks.

 

 

Pressure Control System 

Inboard pressure control system to monitor and control System equilibrium/reaction pressure. Pressure sensed 200 times 
per minute. Internal pressure control system able to monitor pressures up to 508 psi (35 bar) and control vessel pressures 
up to 400 psi (21 bar). 
 

Temperature Control System 

Non-contact sensor for temperature measurement of vessel contents. Temperature sensor independent of vessel volume.

 

Temperature measurement range from -80

 

 

C to 220

 

 

C.

 

 

Stirring 

In situ electromagnetic variable speed. 
 

Service Accessibility 

One panel access to system main circuitry for convenient service and upgrading capability. 
 

Fuses 

10 AMP Fuse (F10A - 250V, 1-1/4” Type, Littlefuse #312010, CEM #BR188270) 
5 AMP Fuse (F5A-250V, 1-1/4” Type, Littlefuse #312005, CEM #BR188280) 
Autosampler (F2A-250V Littlefuse #217002.V, CEM #BR880006) 
 

Patents 

CEM Microwave Systems may be covered by any one of the following U.S. patents: 
04835354, 04080168, 05369034, 04672996, RE034373, 05230865, 04877624, 04672996, 
05206479, 05427741. Other patents pending. 

Содержание Discover SP-D






























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды