CellarPro 2000VSi, Руководство пользователя

Страница: 31 / 37

31
V4.18
Advanced Operation
CellarPro cooling systems can be programmed with advanced settings to achieve more
control over conditions inside the cellar. Con ditions like humidity, the Temperature
Differential, and alarm settings all can be modified for custom applications. To access
the advanced settings, do the following:
Press the “Set” button and the “Down” button together at the same time, and hold for
three seconds. Then, use the “Up” or “Down” button to scroll to the following screen:
LOW TEMPERATURE ALARM: The factory preset for this setting is
45”.
This setting designates the Low temperature inside the cellar at
which the alarm is triggered. We recommend leaving this setting
at the factory preset.
ENERGY SAVINGS MODE DIFFERENTIAL: The factory preset for this
setting is “4”.
This setting i ncreases o r decreases the Tem perature
D i f f e r e n t i a l f o r t h e E n e r g y S a v i n g s M o d e . T h e
recommended setting is 4.
HUMIDITY:
The factory preset for this setting is “3”.
If the humidity inside the cellar is too low, press the “Set”
button, then use the “Up” button until the desired setting is
reached. The recommended range for this setting is 3-6.
TEMPERATURE DIFFERENTIAL: The factory preset for this setting is 4”.
This setting determines the Temperature Differential and
therefore the temperature at which the cooling unit will cycle on.
The recommended setting is 4 if you are measuring air
temperature, or 1 if you are measuring liquid temperature with
our remote thermostat bottle probe.
HIGH TEMP ALARM: The factory preset for this setting is “70”.
This setting designates the High temperature inside the
cellar at which the alarm is triggered. We recommend
leaving this setting at the factory preset.