CellarPro 2000VSi, Руководство пользователя

Страница: 20 / 37

20
V4.18
7. Condensation on the hood can occur in warm and humid environments, even though the inside
of the hood is insulated. If left unattended, this condensation may cause damage to the electrical
components inside the cooling unit. This damage is not covered by the cooling unit’s warranty.
If condensation occurs on the front duct hood, you should do the following ASAP to mitigate
the condensation:
-
Insulate the duct hood by adhering insulation to the outside of the hood.
-
Apply silicone caulking to the seam where the hood meets the cooling unit
•
Summary
Keep in mind the following guidelines before purchasing a wine cooling unit from CellarPro:
•
If the cellar it too large for the cooling unit, the cooling unit will be unable to maintain
proper, even temperatures throughout the cellar.
•
Without proper insulation and an airtight environment, the cooling unit effectively will
become a de-humidifier and potentially will produce buckets of water.
•
The rear of the cooling unit must be installed in a space that is at least as large as the wine cellar unless
the rear intake and exhaust are ducted. Both the front and the rear of the cooling unit require a
minimum clearance of 12 inches.
•
Without access to cool air, either because of improper ventilation or
environments that are too hot, the cooling unit will be unable to maintain proper
temperatures inside the cellar.
Under these conditions, the unit’s internal components may become damaged, the expected useful
life of the wine cooling unit may be adversely affected, and the product’s warranty may b ecome
null and void.