5.2.2.1.2.1. TCP SERVER AND CLIENT CONFIGURATION
After saving the TCP Sockets profile, will open section
TCP Server Settings
(picture below), includes configuration of:
–
port for Telnet service; standard 2001,
–
port for serial port service; standard 2101 (through this port are transferred data to serial port of converter),
–
port for security access to serial port service; standard 2601 (through this port are transferred data to serial port of converter),
and possibility of selection
Enable TCP Keep Alive
– connection will be kept, even if the data is not transmitted over the network.
Fig. 18. Example configuration of TCP server
For configuration of
TCP Client Settings
(Fig 19), select
Automatically establish TCP connections,
connection between client and
TCP server will be automatically. Then select
Always connect and maintain connection
option and in section
Establish connection
to the following network service
enter IP address of device to which TCP client will send data, select service and enter port. There
is also possible to select an option
Enable TCP Keep-Alive
– connection will be kept, even if the data is not transmitted over the
network.
For saving the configuration press
[Apply].
Fig. 19. Example configuration of TCP client
ATTENTION !
Default port of serial port service is 2101.
If on the local network is conflict with other network service using the same port, in the serial server's port configuration
change number of port into another for the server and client service .
18
ADA-14110
