5.2.1.4. CONFIGURATION SETTINGS FOR WLAN NETWORK ACCESS AUTHORIZATION
To make a changes of default setting or new configuration of the ADA-14110, select on left panel
Configuration -> Network
and then
on right
[WiFi 802.1x Authentication Settings]
. These options are only configurable when
[WEP with 802.1x authentication]
or
[WPA with 802.1x authentication]
are enabled on the
[WiFi Security Settings]
tab.
Attention !
For detailed information about configuration this section are available after logging on the port server.
5.2.1.5. NETWORK SERVICES SETTINGS
To make a changes of default setting or new configuration of the ADA-14110, select on left panel
Configuration -> Network
and then
on right
[Network Services Settings]
. This section is used to enable or disable many of network services or configuration of
TCP/UDP ports on which they operate.
Attention !
For detailed information about configuration this section are available after logging on the port server.
5.2.1.6. IP FORWARDING SETTINGS
To make a changes of default setting or new configuration of ADA-14110, select on left panel
Configuration -> Network
and then on
right
[IP Forwarding Settings]
. This section is used to manage of IP routing (forwarding) of packets between network interfaces.
Static routes may be configured and added to the IP routing table to provide additional packet routing rules.
Attention !
For detailed information about configuration this section are available after logging on the port server.
5.2.1.7. SOCKET TUNNEL SETTINGS
To make a changes of default setting or new configuration of ADA-14110, select on left panel
Configuration -> Network
and then on
right
[Socket Tunnel Settings]
. This section is used to connect two network devices - one the ADA-14110 Wireless Serial Server's
local network and the other on the remote network.
Attention !
For detailed information about configuration this section are available after logging on the port server.
5.2.1.8. ADVANCED NETWORK SETTINGS
To make a changes of default setting or new configuration of ADA-14040, select on left panel
Configuration -> Network
and then on
right
[Advanced Network Settings]
. This section is used to fine tune the network connection and network interfaces. The default
settings will typically work in most situations.
Attention !
For detailed information about configuration this section are available after logging on the port server.
5.2.2. SERIAL PORT CONFIGURATION
The configuration of serial port of the ADA-14110 server includes: port description, setting of port profile (operating mode) and setting
of serial transmission parameters (baud rate, data bits, parity, stop bits).
Select on left panel
Configuration -> Serial Ports
and then on right
[Port 1],
will open the configuration details page, includes:
- Port Profile Settings,
- Basic Serial Settings,
- Advanced Serial Settings,
5.2.2.1. PORT PROFILES (OPERATING MODES)
Select on right panel
Serial Port Configuration -> Port Profile Settings
and then press
Change Profile...
will open the page
Select
Port Profile
for selection of port profiles (fig. 17).
Attention !
For detailed information about configuration this section are available after logging on the port server.
16
ADA-14110
