Ceiec Electric Technology
30
Option
Description
Setting
Model
Select the correct model for configuration
Default =
PMC-1380-3-RR-00-16-2-N-F0T2-XX
-XXXX-E
Name
Specify a name for the PMC-1380-3
Default = PMC-1380-3
(Max. 31 characters)
Version
Firmware Version
Date
Firmware’s Date and Time
S/N
Device’s Serial Number
MAC1
MAC address of Ethernet Port 1
MAC2
MAC address of Ethernet Port 2
Notes:
1)
Click <Submit> at the upper left-hand corner of the right-hand pane to store the new
configuration in a local cache before leaving this page.
2)
Click <Save> at the upper right-hand corner of the web page to save the new configuration to the
device’s configuration file that is stored on the PC for Off-Line programming or to download the
new configuration to the PMC-1380-3 for On-Line programming.
3)
Click <Quit> to leave the PMC-1380-3 Web Console. Please ensure that your changes have been
saved before leaving.
4.13 Statistics
This option only exists in the On-Line Web Console.
Click on Statistics under System Maintenance on the left-hand pane and the following screen appears
on the right-hand pane where the communications statistics such as Port Status, Tx (Bytes), Rx (Bytes)
and Connected Time(s) are shown. Click Refresh to toggle the automatic refreshing of the statistical
data.
The PMC-1380-3 supports advanced debugging on a per Channel basis by allowing the user to specify
the Channel to debug and the IP port number. The user will need to save the changes and then reboot
the PMC-1380-3 for this to take effect. Once debugging is enabled, the user can monitor all the
received and transmitted messages on the specified Channel using a HyperTerminal program that
connects to the Debug IP port number with the IP address of the PMC-1380-3’s connected Ethernet
port.
