Ceiec Electric Technology
19
3)
Click <Submit> at the upper left-hand corner of the right-hand pane to store the new
configuration in a local cache before leaving this page.
4)
Click <Save> at the upper right-hand corner of the web page to save the new configuration to the
device’s configuration file that is stored on the PC for Off-Line programming or to download the
new configuration to the PMC-1380-3 for On-Line programming.
5)
Click <Quit> to leave the PMC-1380-3 Web Console. Please ensure that your changes have been
saved before leaving.
4.4 Time Settings
This option exists in both the On-Line and Off-Line programming modes.
Click on Time under Device Settings on the left-hand pane and the following screen appears. Click
Submit and then Save to save your changes after modification.
Option
Description
Setting
Time Zone
Configure the Time Zone
Default = UTC + 08:00
Clock Source
Select the clock source for Time Sync.
RTC: Internal RTC
GPS: GPS inputs
SNTP: Simple Network Time Protocol
Default = RTC
Server IP
Specify the SNTP Server’s IP address
Default = 127.0.0.1
Time Sync. Interval
(min)
Specify how often the PMC-1380-3 contacts the
NTP server for the correct time
1 to 300 minutes
Default = 60
Accept Time
Broadcast
Allow the PMC-1380-3 to accept time broadcast
Default = disable
Notes:
1)
The Default Gateway must be properly configured if the SNTP Server is not located on the same
subnet as one of the Ethernet ports.
2)
Click <Submit> at the upper left-hand corner of the right-hand pane to store the new
configuration in a local cache before leaving this page.
3)
Click <Save> at the upper right-hand corner of the web page to save the new configuration to the
device’s configuration file that is stored on the PC for Off-Line programming or to download the
new configuration to the PMC-1380-3 for On-Line programming.
4)
Click <Quit> to leave the PMC-1380-3 Web Console. Please ensure that your changes have been
saved before leaving.
4.5 Channel Settings
