Ceiec Electric Technology
12
Chapter 3 Operating the PMC-1380-3
3.1 Front Panel
3.1.1
LED Indicators
There are several LED indicators on the PMC-1380-3’s front panel as described in the following table.
Table 3-1 LED Indicators
3.1.2
Reset Button
The front panel has a Reset button. Use a pointed object, such as a straightened paper clip or the tip
of a ball-point pen to access the Reset button. Press and hold the Reset button for 1 second will
cause the PMC-1380-3 to initiate a reboot sequence. The reboot process would complete in
approximately 30 seconds.
3.1.3
Buttons
The PMC-1380-3 has six buttons on the front panel : <
△
>, <
▽
>, <
◁
>, <
▷
>, <Enter>, and <Esc>. Use
the <
△
>, <
▽
>, <
◁
> and <
▷
> buttons to navigate the menu system. Use the <Enter> button to enter
into a sub-menu and the <Esc> key to return to the previous menu.
3.1.4
LCD Display
The LCD display on the PMC-1380-3 allows the user to view its setup parameters. The default screen
is shown in Figure 3-1.
Figure 3-1 Default Screen
The main menu has four options – Settings, Setup, Maintenance and Info. Figure 3-2 below shows the
menu structure for the PMC-1380-3. Pressing the <Enter> button from the default screen enters the
main menu.
LED Indicator
Color
Function
Run
Green
Power is on and the PMC-1380-3 is running normally
Link/Act
Green
Ethernet Connection Indicator
Network Status Indicator
100Mbps
Yellow
100 Mbps Connection Indicator
Rx
Green
The specific serial port is receiving data
Tx
Yellow
The specific serial port is transmitting data
