Ceiec Electric Technology
26
Option
Description
Setting
Enable
Enable the Data Cache
Enable or Disable
Default = Disable
Description
Data Cache Name
Default = Data Cache X
Slave Protocol
Slave Protocol
Default = Modbus TCP
IP Port
IP Port number
1 to 65535
Default = 502 (Modbus
TCP)
Client IP
If the IP address is entered, only the Client with the
specified IP Address will have access to this particular
Data Cache. Otherwise, enter 0.0.0.0 or keep it
empty to allow access by any Clients.
0.0.0.0 to
255.255.255.255
Logging Interval
If the Logging Interval parameter is set to 15
(minutes), the recording will take place at 00:15,
00:30, 00:45, 01:00 …etc.
0, 1, 5, 10, 15, 20, 30, 60
Default = 0 (Disable)
Notes:
1)
PMC-1380-3 supports up to 16 TCP connections for Client access over Ethernet.
2)
Click <Submit> at the upper left-hand corner of the right-hand pane to store the new
configuration in a local cache before leaving this page.
3)
Click <Save> at the upper right-hand corner of the web page to save the new configuration to the
device’s configuration file that is stored on the PC for Off-Line programming or to download the
new configuration to the PMC-1380-3 for On-Line programming.
4)
Click <Quit> to leave the PMC-1380-3 Web Console. Please ensure that your changes have been
saved before leaving.
4.9 Data Cache
This option exists in both the On-Line and Off-Line programming modes.
Click on Data Cache under Data Cache Management on the left-hand pane and the following screen
appears.
