CEA DIGITECH vision PULSE 3000, Руководство оператора

Страница: 78 / 100

54
WELDING MODE SELECTION LED
The LED unit indicates the welding mode saved in the JOB selected, which is coherent with
the
VISION S
CREEN
.
HOLD F
UNCTION
LED
Flashes for a set time, informing the operator that the HOLD Function is active.
PARAMETER DISPLAY S
CREEN
- V
Shows the number for the JOB selected or the value for the parameter indicated by the
PARAMETER SELECTION LED - V
.
PARAMETER SELECTION LED - V
The LED unit indicates the welding parameter selected using the
PARAMETER SELECTION K
EY
- V
.
PARAMETER SELECTION K
EY
- V
Scrolls the active parameters in succession, based on the type of welding process saved in
the JOB selected.
In this case the values displayed are those for: HOLD .
SPECIAL FUNCTIONS (F
X
) K
EY
Used to access the display of the SPECIAL FUNCTIONS (Fx) saved in the JOB selected,
interrupting the HOLD Function .
Error condition
WARNING: Under normal conditions of use it is not possible to open the “ERROR LOG Menu” display since the alarm message
appears instantaneously on the VISION S
CREEN
as soon as the problem arises on the welding plant. At this stage it is not possi-
ble to weld!
As soon as the error message appears:
“DH” CONTROL PANEL
MENU K
EY
ENTER/MEM K
EY
ENCODER K
NOB
- SX ENCODER K
NOB
- DX
VISION S
CREEN
SX K
EY
DX K
EY
ERRORS 1
E0.6 WATER COOLER MISSING
SX K
EY
If held down for a period of about 5 consecutive seconds it takes the VISION S
CREEN
to the
SETUP Menu .
ENCODER K
NOB
- SX Used to scroll the alarms activated.
VISION S
CREEN
Shows the alarm signal ( ), number of the errors that have occurred (e.g. ERRORS 1) and
an indication of what happened (e.g. E.06 WATER COOLER MISSING) of the welding ma-
chine.