CEA DIGITECH vision PULSE 3000, Руководство оператора

Страница: 55 / 100

31
6 - HOLD MIG-MAG synergic
When welding ends the fields in the display must show the same values that were displayed during welding, with the difference
that they are now values defined as HOLD . In this phase the
VISION S
CREEN
shows the HOLD box highlighted, while on the HT4
panel the
HOLD F
UNCTION
LED
flashes until the end of the HOLD Function . If the HOLD Function is Interrupted via a panel (e.g. DH),
it will also be interrupted automatically on the other (HT4) and vice-versa.
“DH” CONTROL PANEL
MENU K
EY
ENTER/MEM K
EY
ENCODER K
NOB
- SX ENCODER K
NOB
- DX
VISION S
CREEN
SX K
EY
DX K
EY
CrNi Ø 1.2 98Ar2CO2
PROGRAM 0203
A V
86 25.9
MENU K
EY
Used to access the PROCESS SELECTION Menu (PROCESS) interrupting the HOLD
Function and subsequent menus, as applicable.
SX K
EY
Scrolls in succession THICKNESS OF WELDED ITEM ( ) - WELDING CURRENT ( )
- WIRE SPEED ( ) only on the VISION S
CREEN
(this operation is activated when the key is
released).
In this case the values displayed are those for: HOLD .
ENCODER K
NOB
- SX Adjusts the parameter selected using the SX K
EY
interrupting the HOLD Function .
ENTER/MEM K
EY
If held down for 3 consecutive seconds, it interrupts the HOLD Function and makes it
possible to access SAVE JOB .
DX K
EY
Scrolls in succession ARC LENGTH ADJUSTMENT ( ) - WELDING VOLTAGE ( ) -
ELECTRONIC INDUCTANCE ( ) only on the
VISION S
CREEN
(this operation is activated when
the key is released).
In this case the values displayed are those for: HOLD .
ENCODER K
NOB
- DX Adjusts the parameter selected using the DX K
EY
interrupting the HOLD Function .
“HT4” CONTROL PANEL
WELDING MODE SELECTION LED
WELDING MODE SELECTION K
EY
WIRE K
EY
ENCODER K
NOB
- A
PARAMETER SELECTION K
EY
- A
PARAMETER SELECTION LED - A
PARAMETER DISPLAY S
CREEN
- A
SPECIAL FUNCTIONS (F
X
) LED
SPECIAL FUNCTIONS (F
X
) K
EY
GAS K
EY
ENCODER K
NOB
- V
PARAMETER SELECTION K
EY
- V
PARAMETER SELECTION LED - V
PARAMETER DISPLAY S
CREEN
- V
HOLD Function LED
PARAMETER DISPLAY S
CREEN
- A
Shows the parameter indicated by the
PARAMETER SELECTION LED - A
.
PARAMETER SELECTION LED - A
The LED unit shows the welding parameter selected using the
PARAMETER SELECTION K
EY
- A
.
PARAMETER SELECTION K
EY
- A
Scrolls in succession THICKNESS OF WELDED ITEM ( ) - WELDING CURRENT ( ) -
WIRE SPEED ( ) only on panel HT4.
In this case the values displayed are those for: HOLD .
ENCODER K
NOB
- A
Adjusts the parameter displayed by the PARAMETER DISPLAY S
CREEN
- A interrupting the HOLD
Function .
WIRE K
EY
Activates loading of the wire without interrupting the HOLD Function .
(continued)