CE+T Power TSI VEDA, Руководство пользователя

Страница: 30 / 41

12. Inserting/removing/replacing modules
12.1 TSI Inverter
„ „
The TSI inverter is hot swappable.
„ „ When a new module is inserted in a live system it automatically adapt to working set of parameters.
„ „
When a new module is inserted in a live system it automatically assigns the next available address.
12.1.1 Removal
Notice: When one or several inverter modules is/are removed it gains access to live parts. Replace module with blinds without delay.
„ „
Inverter module is not switched off when opening the handle. The handle only fixes the module to the shelf.
„ „ Use a screw driver to release the latch of the handle
„ „
Open the handle
„ „ Pull the module out
„ „
Replace with new module or blind unit
12.1.2 Inserting
„ „
Use a screw driver to release the latch of the handle
„ „ Open the handle
„ „
Push firmly until the unit is properly connected.
„ „ Close the cover and latch in position
A) Use screwdriver to release the latch B) open the cover completely C) Use the cover as a handle to remove
the module
A) Slide the module in B) Push firmly till the connection is
properly engaged
C) Close the cover and latch the module
in place if too hard redo step B
30 – TSI VEDA – User manual – v7.1