manualshive.com logo in svg

CE+T Power TSI VEDA, Руководство пользователя

Поделиться
Скачать
CE+T Power TSI VEDA Скачать руководство пользователя страница 12

7. System Design

7.1  Pack / A la Carte

The systems designed are divided in two topologies.

7.1.1  Pack 

The PACK is a pre assembled and configured single phase inverter system comprising 19”  
inverter sub rack, inverter modules, monitor device and AC output distribution breaker.  
The PACK is normally mounted in a 19” rack. Mounting kit is included in the delivery. 
The PACK is only available as single phase, -48VDC, REG-mode.  
A PACK comprises of max 5 inverter modules.

7.1.2  A la Carte

The A la Carte is pre assembled and configured as single phase systems. The system comprises cabinet, inverter sub rack, 
inverter modules, monitor device(T2S) and AC output distribution.

The A la Carte is available as only REG (Regular) operation. 
The A la Carte (single phase) populate 1 to 24 modules, max 14.4KVA  
 

„

„

Single input (DC) inverter modules (REG)

„

„

89% efficiency at REG mode

„

„

Always conditioned and filtered output voltage

„

„

No single point of failure

„

„

Flexible AC output distribution

„

„

T2S MOD bus default, T2S CAN bus optional

„

„

Full modularity 

„

„

Full redundancy

T1S/T2S

Blank

TSI

AC Output

12 

– TSI VEDA – User manual – v7.1

Содержание TSI VEDA










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды