Cawomat 2000 IR, Справочное руководство, Страница: 64 / 142

1220C GB 19991004
3
Check that the infrared tubes in the dryer assembly light during the dryer fan cy-
cle.
– This can be viewed by removing the processor cover and dryer assembly cover.
– To momentarily check the infrared tubes, depress the interlock switch with a pencil or
a screwdriver.
Chemical / Fixer replenishment
1
Check that the fixer is not exhausted.
– If the tanks have not been cleaned according to the weekly cleaning schedule (refer to
chapter 3, ‘Cleaning the Cawomat 2000 IR’), drain and clean the fixer tank and the re-
plenishment bottle.
– Replace the fixer tank, mix a new solution in the replenishment bottle and reinsert it in
the processor. The tank will be filled automatically.
– Check for proper film drying by running an exposed test film.
2
If the processor has been idle for more than one day, the fixer may have to be
replenished.
Depress the manual replenishment key to initiate a replenishment cycle of 3 minutes. The
indicator light should remain illuminated and the replenishment pump motor should oper-
ate at double speed.
60
Advanced service
5
INSTRUCTIONS FOR SKILLED SERVICE PERSONNEL ONLY
1220C Cawomat 2000 IR RM 07-10-99 14:19 Page 60