Cawomat 2000 IR, Справочное руководство, Страница: 32 / 142

1220C GB 19991004
5
After completion, mark the new liquid level on each bottle and measure the level
difference from the first mark to the second.
6
Compare the rates with those in the table below. If you have an incorrect replen-
ishment value for one of the replenishment bottles, the rate should be adjusted,
as described on the next pages.
The table indicates the amount of liquids (± 15% tolerance) flowing into the tanks during a
replenishment period of approximately 3 minutes.
Film sizes Developer Fixer Rinsing water
average mix 8 mm (5/16”) 11 mm (7/16”) 13 mm (1/2”)
larger than 240x300 mm 11 mm (7/16”) 13 mm (1/2”) 13 mm (3/4”)
smaller than 240x300 mm 5 mm (3/16”) 8 mm (5/16”) 11 mm (7/16”)
❖
The above values are based on a daily throughput of at least 10 films. If fewer films are
being processed, you ought to increase the replenishment rate of the developer and
change all tanks more frequently.
28
Getting started
2
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 28