Cawomat 2000 IR, Справочное руководство, Страница: 36 / 142

1220C GB 19991004
90 x 120 mm. Films of these sizes have to be fed diagonally.
Films are processed for about two minutes and then discharged on the output tray.
2
Check to see if processing and drying are satisfactory. If so, you can start regu-
lar processing.
If you detect a problem, refer to chapter 4, ‘Troubleshooting’. But first, try switching the
processor OFF and ON again. This can often solve the problem.
Switching off
After work, or at the end of the day, switch off the Cawomat 2000 IR as follows:
1
Switch off the processor and disconnect the power cord from the outlet.
2
Remove the developer replenishment bottle (marked by a red dot) to stop un-
necessary oxidation.
3
Remove the water replenishment bottle (marked by a white dot) and pour out
the water to prevent the forming of algae.
4
Slightly raise the processor cover to prevent condensation of chemicals.
32
Getting started
2
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 32