Cawomat 2000 IR, Справочное руководство, Страница: 35 / 142

1220C GB 19991004
Using the Cawomat 2000 IR
Switching on
1
Plug the power cord into the wall outlet.
2
Check whether the replenishment bottles are full enough and examine the level
in the waste bottles.
❖
Only switch on the processor with full tanks.
3
Turn off all lights but the darkroom safelight.
4
Switch the processor on by pressing the power switch (to position ‘I’).
❖
The processor will automatically be switched off if the dryer assembly cover or the
processor cover is not properly closed.
5
Wait for about 7 minutes to achieve the appropriate operating temperature.
Additional replenishment
If the processor has been idle for more than 24 hours, press the manual replen-
ishment key to initiate an additional replenishment period of 3 minutes.
Film feed
❖
Caution: Do not put films on or near the dryer! Films can get fogged when placed on
the dryer.
You should first run a test film if, for example, the machine has been standing
idle for some time.
1
Push the film into the feed slot until the LED above the replenishment key shows
a red light. When the LED turns off, you can feed the next film.
The largest film width is 350 mm, the smallest sizes processable are 100 x 100 mm and
31
Getting started
2
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 31