Cawomat 2000 IR, Справочное руководство, Страница: 31 / 142

1220C GB 19991004
Checking the replenishment rates
The Cawomat 2000 IR processor features an automatic replenishment system,
in which the replenishment cycle is controlled by the length of the film.
However, the width of the film will affect the replenishment rates. By watching
the liquid levels in the replenishment bottles you can easily check and - if neces-
sary - adjust the replenishment rates.
❖
Each of the three replenishment bottles has its own replenishment rate.
Checking the replenishment rate is required in the following circumstances:
■ After installation of the machine.
■
After replacement of the pumps.
■
If the standard film size is altered. The replenishment pumps have been factory-
set for average replenishment rates based on processing 240 x 300 mm films. If
you will be processing either mainly larger or smaller sizes, it will be necessary
to adjust the pumps.
1
Insert full replenishment bottles.
2
Switch the processor on and wait several minutes until the tanks have com-
pletely filled.
3
Carefully indicate the liquid level on each bottle, using a marker.
4
Depress the manual replenishment key to start an additional replenishment cy-
cle of about 3 minutes.
The indicator light turns on.
27
Getting started
2
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 27