Cawomat 2000 IR, Справочное руководство, Страница: 48 / 142

1220C GB 19991004
Reinstalling all parts
❖
Follow the color codes carefully. Consult the table on page 36.
1
Put the rollers, the guide plates and the tank covers back into the appropriate
tanks.
Make sure that the bent edges of the guide plates are inserted into the grooves on the
side of the even numbered rollers of the tanks.
2
Install the tank units into the processor.
– Make sure that the roller gears are properly engaged with their drive gears.
– Make sure that the drain valves are fastened in the upright/closed position.
– Make sure that the heaters are engaged in their retaining slots.
– Make sure that the heater cables are put back in their clips.
3
Replace the processor cover.
Make sure that the interlock pin, which is marked on the processor cover with a white
dot, is properly engaged with the interlock switch (together with the pin on the dryer as-
sembly cover). If not, the processor will fail to work.
4
Chemical and water replenishment bottles may now be reinserted.
The tanks will be filled automatically.
44
Cleaning
3
1220C Cawomat 2000 IR RM 07-10-99 14:18 Page 44