Cawomat 2000 IR, Справочное руководство, Страница: 63 / 142

1220C GB 19991004
Film drying problems
Most film drying problems are caused by insufficient hardening of the film due
to inadequate fixer replenishment or to fixer exhaustion. However, the problem
can also be caused by a mechanical or electrical failure in the control circuits,
the dryer or the replenishment system, or by adverse temperature or humidity
problems. You may have to check one or more of the following:
Mechanical / Electrical
1
Check for excess temperature or humidity.
Ambient temperature should be less than 30°C / 86°F and humidity should be less than
80%.
2
Check that the dryer fans are operating.
– Turn the power switch OFF, and then ON again to activate a fan sequence.
59
Advanced service
5
INSTRUCTIONS FOR SKILLED SERVICE PERSONNEL ONLY
1220C Cawomat 2000 IR RM 07-10-99 14:19 Page 59