manualshive.com logo in svg

CAVRO XP 3000, Руководство оператора, Страница: 2 / 134

Поделиться
Скачать
CAVRO XP 3000 Скачать руководство пользователя страница 2

Contents 

ii

Copyright © 1998 Cavro Scientific Instruments, Inc.

Part number: 725730C

Copyright and Trademark Information

Teflon

 is a registered trademark of E.I. DuPont de Nemours & Co., Inc.

Kel-F

 is a registered trademark of the 3M Company

CONTRAD

â

 is a registered trademark of Decon Laboratories, Inc.

Microsoft Windows

â

, Windows 3.1

â

, Windows 95

â

, and Windows NT

â

 are registered trademarks of Microsoft

Corporation.

Product Warranty Information

Cavro warrants that instruments manufactured and sold by Cavro will be free from defects in materials and
workmanship for a period of twelve (12) months from the date of shipment to customer. Cavro’s liability for the
breach of the foregoing warranty is limited to the repair or replacement of the products found to be other than
warranted. Such products will be accepted for return only if customer returns them to Cavro’s factory or repair depot
within thirty (30) days from the time of discovery of the alleged defect, and prior to return, obtains a return
authorization number from Cavro, provides Cavro with the serial number of each instrument to be returned, and
prepays freight charges to the factory or a designated Cavro repair depot. No warranty is expressed or implied for:

•

 

Breakage

•

 

Syringes

•

 

Maltreatment

•

 

Syringe seals

•

 

Unauthorized service

•

 

Tubing and tubing connections

•

 

Units not returned in original or adequate packaging

•

 

Cavro Valves

•

 

Units which are “life-cycled”

•

 

Cavro Probes

The foregoing warranties and limitations are customer’s exclusive remedies and are in lieu of all other warranties,
express or implied, including without limitation any warranty of merchantability or fitness for a particular purpose.

Product Documentation Warranty Information

The information contained in this document is subject to change without notice. Cavro makes no warranty of any
kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness
for a particular purpose.

Cavro shall not be liable for errors contained in this document or for incidental or consequential damages in
connection with the furnishing, performance, or use of this material.

Содержание XP 3000







































































































































Отзывы:

Нет отзывов