Cavium FastLinQ 45000 Series, Руководство пользователя

Страница: 77 / 342

5–Adapter Preboot Configuration
Configuring Partitions
50 BC0154501-00 P
To configure partitions:
1. To examine a specific partition configuration, on the Partitions Configuration
page (
Figure 5-14 on page 48 ), select Partition n Configuration .
2. To configure the first partition, select Partition 1 Configuration to open the
Partition 1 Configuration page ( Figure 5-17 ), which shows the following
parameters:
 Personality
 NIC Mode (always enabled)
 Number of VFs per PF (if SR-IOV was enabled on the Device Level
Configuration page)
 PCI Device ID
 PCI (bus) Address
 Permanent MAC Address
 Virtual MAC Address
Partition 1 is always present and cannot be disabled.
Figure 5-17. Partition 1 Configuration
3. To configure the second partition, select Partition 2 Configuration to open
the Partition 2 Configuration page. If FCoE Offload is present, the Partition 2
Configuration shows the
Personality as FCoE ( Figure 5-18 ) and the
following additional parameters:
 NIC Mode ( Disabled )
 FCoE Offload Mode ( Enabled )
 FCoE (FIP) MAC Address
 Virtual FIP MAC Address
 World Wide Port Name
 Virtual World Wide Port Name