Cavium FastLinQ 45000 Series, Руководство пользователя

Страница: 140 / 342

6–Boot from SAN Configuration
FCoE Boot from SAN
113 BC0154501-00 P
3. In the FCoE General Parameters menu ( Figure 6-32 ), press the UP
ARROW and DOWN ARROW keys to select a parameter, and then press
ENTER to select and input the following values:
 FIP VLAN ID : As required (if not set, adapter will attempt FIP VLAN
discovery)
 Fabric Login Retry Count : Default value or as required
 Target Login Retry Count : Default value or as required
Figure 6-32. FCoE General Parameters
4. Return to the FCoE Boot Configuration page.
5. Press ESC, and then select FCoE Target Parameters .
6. Press ENTER.
7. In the FCoE Target Configuration , enable Connect to the preferred FCoE
target.
8. Type values for the following parameters ( Figure 6-33 ) for the FCoE target,
and then press ENTER:
 WWPN n
 Boot LUN n
Where the value of n is between 1 and 8, enabling you to configure 8
FCoE targets.