Cavitar C300 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 43

Cavitar C300 Скачать руководство пользователя страница 6

4

CERTIFICATIONS AND COMPLIANCE



Cavitar Ltd. is an ISO 9001:2015 certified company



CE declaration of conformity

o

Welding Camera, if installed and operated in accordance with the

manufacturer’s instructions, is in conformity with the following European,
harmonized and published directives and standards:



2011/65/EU (RoHS 2)



2014/30/EU (Electromagnetic Compatibility)



2014/35/EU (Low Voltage Directive)



BS/EN 60825-1:2014 (Laser Safety)



Declaration of conformity with 21 CFR 1040.10 and 1040.11

o

Complies with 21 CFR 1040.10 and 1041.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.



Safety

o

Welding Camera meets the requirements of the following electrical equipment
safety standards:



IEC 61010-1:2010 + Am1:2016



EN 61010-1:2010



UL 61010-1: 3rd Edition



CSA C22.2 No. 61010-1-12



Electromagnetic compatibility (EMC)

o

Welding Camera meets the requirements of the following EMC standards:



IEC 61326-1:2020: Immunity in an industrial electromagnetic
environment



CISPR 11:2015/AMD2:2019: Group 1, Class A emissions



FCC 47 CFR Part 15B: Class A emissions



ICES-003 Issue 6: Class A emissions

Group  1  equipment  is  any  industrial,  scientific,  or  medical  equipment  that  does  not
intentionally  generate  radio  frequency  energy  in  the  frequency  range  9  kHz  to  400  GHz  for
the treatment of material or inspection/analysis purposes.

Class  A  equipment  is  suitable  for  use  in  all  establishments  other  than  domestic  and  those
directly connected to a low voltage power supply network which supplies buildings used for
domestic purposes.

Warning: Class A equipment is intended for use in an industrial environment. There may be
potential difficulties in ensuring electromagnetic compatibility  in other environments, due to
conducted  as  well  as  radiated  disturbances.  This  device  complies  with  part  15  of  the  FCC
Rules.  Operation  is  subject  to  the  following  two  conditions:  (1)  This  device  may  not  cause
harmful  interference,  and  (2)  this  device  must  accept  any  interference  received,  including
interference that may cause undesired operation.

«
...
4
5
6
7
8
...
»

Содержание C300












































Отзывы:

Нет отзывов