411, 611 & 325 OCU
User Manual
5
9M02-8999-A001-EN
1. Introduction
This manual includes general information concerning the operation of the Remtron 411, 611 and 325 radio remote
Operator Control Units (OCUs). The information is of a general nature and does not include system-specific data.
System-specific data is provided in the technical documentation accompanying the delivery of the system.
For information pertaining to the matching Machine Control Unit (MCU), please refer to the separate MCU user
manual.
1.1 Terminology
The following represents important acronyms and long form names used in this document:
•
OCU
– Operator Control Unit, historically referred to as a
transmitter
•
MCU
– Machine Control Unit, historically referred to as a
receiver
2. Warnings and Cautions
2.1 Warnings
WARNING statements have been strategically placed throughout all text prior to operating or maintenance
procedures, practices, or conditions considered essential to the protection of personnel or equipment and
property. A WARNING applies each time the related step is repeated. Before starting any task, the WARNINGS
included in the text for the task should be reviewed and understood.
WARNINGS appearing in this manual follow the general format below.
WARNING
Description of warning
Possible consequence of non-compliance
2.2 General Safety Information
•
Persons under the influence of drugs, alcohol and/or other medicine that impairs reaction may not
assemble, disassemble, install, put into operation, repair or operate the product.
•
All conversions and modifications of an installation or system must conform to the relevant safety
requirements.
•
Only qualified, trained, authorized personnel may perform work on the equipment, in accordance with the
relevant safety requirements.
•
In the event of malfunction and/or visible defects or irregularities, the product must be stopped, switched
off, and the relevant master switches also switched off.
