411, 611 & 325 OCU
User Manual
29
9M02-8999-A001-EN
9.5.6.2
Connection Tab
If a connection could not be established or the application was not previously connected to a device, then the
connection page will be displayed instead.
Pressing the ‘Scan Devices’ button will scan available BLE devices, the process will be completed after few
minutes or a user can stop the scanning process by pressing the ‘Stop Scan’ button.
To connect or disconnect a device, select any device from the list and the relevant buttons will be displayed.
On successful device connection the device information page will be displayed, and device will be added to
‘Recent Devices’ panel.
Figure 11 Connection Page