411, 611 & 325 OCU
User Manual
26
9M02-8999-A001-EN
9.5.2 Recent Devices
List of recently connected devices are shown in the panel on the right. It consists of an icon for each of the
recently connected device and its Name or Serial Number.
When the icon for an OCU or MCU is double clicked the application tries to connect to the device and after
successfully connecting to it, will ask for a PIN to complete the connection, the default key is 219547 but this can
be changed in the configuration file.
The OCU needs to have just been started (within 60 seconds) and in Passive mode.
If a connection could not be established, then the dialog box for connecting to the device is still shown. This is the
same as that opened from the ‘Device’ menu, also pay attention to the logs window at the bottom of the page, if a
connection is not established, retry a few times.
Each icon for a recently connected devices has item in the context menu, (right click), to remove the device from
the recently connected list.
Figure 7 Recent Devices
