Cateye PADRONE DIGITAL CC-PA400B, Руководство пользователя

Страница: 16 / 50

Cover,
Introduction
3
SET
4
1
5
Appendix
App
4/4
2
16
5
Tap [Pair to Device] once again to start the pairing of the
sensor and Cateye Cycling™ app.
Caution!:
•
To use the PADRONE DIGITAL, you have to pair it with a sensor that
supports the Bluetooth® standard.
•
Avoid pairing sensors at a race venue or in similar locations where there
are a lot of other users. Doing so may cause the PADRONE DIGITAL to be
paired with another device.
•
Pairing the PADRONE DIGITAL with third party sensor:
Refer separately to pair the PADRONE DIGITAL with third party sensor.
“Pairing” (Page 24)
6
Activate the sensor.
Use one of the methods in the following table to activate the sensor.
Included sensor Activating the sensor Display
Speed/Cadence sensor
(ISC-12)
Move the magnet through the sensor zone several times.
(Within 3 mm)
ISC
When Cateye Cycling™ app detects the sensor signal, a message is displayed on
the smartphone.
Setting up the PADRONE DIGITAL