Cateye PADRONE DIGITAL CC-PA400B, Руководство пользователя

Страница: 24 / 50

Cover,
Introduction
3
1
5
2
Using the app
Using the unit
Appendix
SET
4/9
4
24
MODE
MODE
MODE
MODE
MODE
MODE
MODE
MODE
Pairing
You can pair the unit with a sensor.
Caution!:
•
To use the PADRONE DIGITAL, you have
to pair it with a sensor that supports the
Bluetooth® standard.
•
Avoid pairing sensors at a race venue or
in similar locations where there are a
lot of other users. Doing so may cause
the PADRONE DIGITAL to be paired with
another device.
Included sensor Activating the sensor Display
Speed/
Cadence sensor
(ISC-12)
Move the magnet
through the sensor zone
several times.
(Within 3 mm)
ISC
* For the CATEYE sensor signal activation procedure,
refer to the sensor’s online manual .
* When pairing a sensor with the PADRONE DIGITAL, a
“ C ” is displayed after the sensor name.
(*5) To continuously pair multiple sensors, hold down
MODE
without confirming the settings to return
to the pairing standby screen, and then repeat the
same procedure. Pair all sensors that you intend to
use.
Menu screen Description
Smartphone
search
Total
distance
Upper
display
Middle
display
Function
Measurement
unit
Clock
Tire
circum-
ference
Measurement
screen
Changing settings [Menu screen]
Pairing standby
screen
Use one of the
methods in the
following table to
activate the sensor.
Pairing complete
The name of the
sensor is shown in
the upper display.
Sensor signal
MODE
MODE
MENU
MENU
MODE
Re-verify
(*5)
MENU
(Press and hold)
(Press
and hold)
Change setting
Confirm