Cateye PADRONE DIGITAL CC-PA400B, Руководство пользователя

Страница: 47 / 50

Cover,
Introduction
3
SET
4
1
5
2
Using the app
Using the unit
Appendix
5/8
47
PADRONE DIGITAL: Measurement does not work
Why is the sensor signal not being received? (Continued)
•
Is the sensor paired with the unit?
The sensor must be paired with the PADRONE DIGITAL. Perform the pairing with
the PADRONE DIGITAL or with a Cateye Cycling™ app.
• PADRONE DIGITAL: “Pairing” (Page 24)
• Smartphone: “Adding a new CATEYE sensor” (Page 38)
Caution!: Pairing a third party sensor with the PADRONE DIGITAL
When using with a third party sensor, perform pairing with the Padrone
Digital separately.
“Pairing” (Page 24)
•
Is the PADRONE DIGITAL or sensor battery flat?
* Battery performance diminishes in winter.
Replace the batteries with new ones as described in “Replacing the battery” (Page 45).
If speed sensor signals or cadence sensor signals are not received
•
Is the clearance between the sensor zone of the sensor and the magnet too
large? (The clearance must be within 3 mm.)
•
Does the magnet pass through the sensor zone correctly?
Adjust the position of the magnet and/or the speed sensor.
If heart rate signals are not received (optional or third party sensor)
Refer to the heart rate sensor instruction manual and attach the heart rate sensor
in the correct position.
* For information about the CATEYE sensor, refer to the
sensor’s online manual .
Appendix
Troubleshooting