Cateye PADRONE DIGITAL CC-PA400B, Руководство пользователя

Страница: 10 / 50

Cover,
Introduction
3
SET
4
1
5
Appendix
Unit
2/4
2
10
2
Select the measurement unit.
Press MODE to select “ km/h ” or “ mph ”.
After selecting a value, press MENU to proceed
to the next step.
3
Pair with a sensor.
Caution!:
•
To use the PADRONE DIGITAL, you have to pair it with a sensor that
supports the Bluetooth® standard.
•
Avoid pairing sensors at a race venue or in similar locations where there
are a lot of other users. Doing so may cause the PADRONE DIGITAL to be
paired with another device.
The unit switches to the pairing standby screen and Pr
flashes on the screen.
Included sensor Activating the sensor Display
Speed/Cadence
sensor (ISC-12)
Move the magnet through the sensor zone
several times. (Within 3 mm)
ISC
* For the CATEYE sensor signal activation procedure, refer to the sensor’s online
manual .
Once pairing is complete, the name of the sensor is shown in the upper display.
* When pairing a sensor with the PADRONE DIGITAL, a “
C
” is displayed after the
sensor name.
4
To pair multiple sensors, hold down MODE to return to the
pairing standby screen.
Repeat step 3 to pair all the sensors that you intend to use.
* To add heart rate measurement, perform pairing with the
heart rate sensor here.
Once you are finished pairing sensors with the unit, press
MENU
to proceed to the next step.
Setting up the PADRONE DIGITAL
MODE
MENU
Re-verify
(press and hold)
Confirm
MENU
MODE
km/h
↔
mph
Confirm