Unit
3/4
2
11
5
Set tire circumference.
Enter the tire circumference (the length of the
outer circumference of the tire) in mm for the
tire on which the sensor is installed.
(100 to 3999 mm)
* Refer to
“Tire circumference table” (Page 12)
* In the setup of the PADRONE DIGITAL,
sensors capable of speed measurement are
set to the same tire circumference value.
To change the tire circumference for each sensor, see the menu screen,
“Tire circumference” (Page 23)
, after completing setup.
After entering a value, press
MENU
to proceed to the next step.
6
Set the clock.
Each time
MODE
is pressed and held, settings
switch from time display mode, to hours, to
minutes.
* When
12h
is selected, press
MODE
to select
A
(a.m.) or
P
(p.m.).
MODE
A
(a.m.)
↔
P
(p.m.)
7
Press
MENU
to complete setup.
Setup is completed and the PADRONE DIGITAL switches
to the measurement screen.
For instructions on how to start measurement, refer to
“Starting measurement” (Page 18).
Setting up the PADRONE DIGITAL
MODE
MENU
MODE
Increase
numbers
Move to next digit
(Press and hold)
Confirm
MODE
MODE
Switch between
24h
and
12h
or increase
numbers
Switch setting
item
(Press and hold)
Time display mode
Minutes
Hours
MENU
Setup complete
