Other information
Standby screen configuration alarm
In normal conditions the standby
screen offers five option choices.
However, if the home unit detects one
or more problems with any part of
the system, a sixth choice appears,
called
ALARM
. The corresponding soft
buttons will flash and initially warning
beeps will also be sounded. Press
the
ALARM
soft button to discover the
problem(s).
To check the standby screen configuration alarm
1 Press the flashing
ALARM
soft button.
The display will indicate the first discovered problem. Common causes could
be:
•
XXX ALARM
- Either the home unit, a registered pendant or registered
pullcord with the name
XXX
has triggered an alarm.
•
PHONE LINE FAIL
- Check the connection to, and the correct operation
of, the phone wall socket.
•
MAINS FAIL
- Check the mains supply from the adapter.
•
HOME UNIT LOW BATTERY
- Allow the backup battery time to charge
within the home unit. If this message does not cease after 24 hours, seek a
replacement backup battery pack.
•
BATT FAIL
- Check the connection of the backup battery within the home
unit.
•
XXX LOW BATTERY
- A registered pendant or pullcord with the name
XXX
has reported a low battery. The low battery alarm can be cancelled
by pressing the
ALARM
soft button when the low battery alarm screen is
visible. Press the large green C (cancel) button.
2 If there is more than one problem, the
NEXT
option will be shown in the lower
right corner of the display. Press the
NEXT
soft button to view the next
problem.