Registering the pendant(s) and pullcord(s)
Before a speech pendant or speech pullcord can be used with the home unit,
each must be registered. It is often easier to register pullcords before they are
mounted in place so that you can bring them closer to the home unit.
To register the pendant(s) and pullcord(s)
1 Select the
SETTINGS
menu screen.
See page 18 for details.
2 Use
until the
REGISTER
option is level with the symbol,
then press the
ENTER
soft button.
The display will then show two options:
PENDANT
and
PULLCORD
.
3 Use
until the required option is level with the symbol,
then press the
ENTER
soft button. The display will now ask you to either press
the button on the pendant or pull the cord of the pullcord. This screen will
remain for one minute.
4 On the pendant or pullcord, either push the button or pull the cord until
all three of the device’s indicators illuminate and two sets of beeps have
sounded. Two of the indicators will then extinguish to leave just the red one lit
and the home unit should respond at this stage with either:
REGISTER SUCCESSFUL
or
REGISTER UNSUCCESSFUL
.
Note: It can take up to one minute to register a pendant or pullcord.
• If unsuccessful, try the procedure again. If it still does not register, try
changing the batteries in the device or try a different pendant or pullcord.
Please wait until the device has reset (after a further two minutes) before
trying to register it again.
• If successful, the display will now prompt you to enter a name for the new
device.
5 Use the top corner keypad to enter a name (e.g. John) or location (e.g.
Bedroom) for the device:
• Repeatedly press the button containing the required character until that
character is shown on the display.
• Press the button to move the cursor to the next position and then enter
the next character.
Note: If the next character is on a different button to the
last one pressed, you don’t need to press the button.
• To enter a space, press the button twice.
• If required, use the large green C (cancel) button to erase characters.
6 Press the
STORE
soft button to save the name or location of the device and
return to the
REGISTER
menu. The device is now stored and can be used to
trigger an alarm.
To deregister a pendant or pullcord
Please see page 39 for details.