10
11
10
11
Entering the alarm sequence contact numbers
When an alarm is triggered, the home unit needs to make contact with some-
one who can help. It can be made to do this in one of two slightly different
ways, either:
• Sequentially call through a list of up to ten friends, family or neighbours until
one of them responds, whereupon a recorded message will greet them and
tell them what to do next, or
• Call directly to a central 24-hour monitoring agency and automatically report
your details, whereupon assistance can be summoned.
The first option is called
PRIVATE
and the second option is known as
CENTRAL
. In both cases, once contact is made, you can then talk to the
person at the other end of the line.
To select the required alarm sequence
1 Select the
SETTINGS
menu screen.
See page 7 for details.
2 Use
until the
ALARM SEQUENCE
option is level with the symbol,
then press the
ENTER
soft button.
The display will then show two options:
PRIVATE
and
CENTRAL
.
3 If you will be using a central monitoring agency choose the
CENTRAL
option,
otherwise select the
PRIVATE
option.
For further details:
•
PRIVATE
see ‘To enter private alarm sequence contacts’ on page 12
•
CENTRAL
see ‘To enter a central alarm sequence contact’ on page 14
Note: If any contact details are stored within the
CENTRAL
section, the home
unit will only use those details during an alarm. Any stored
PRIVATE
contact
details will be ignored. Be sure that the
CENTRAL
section is set to
EMPTY
if you wish to use
PRIVATE
dialling. See ‘To permanently remove a central
entry’ on page 15.