Case CX490D, Руководство оператора

Страница: 10 / 370

1 - GENERAL INFORMATION
The description of the models shown in this manual has been made in accordance with the technical specifications
known as of the date of design of this document.
All data given in this manual is subject to production variations. Dimensions and weights are provided with approxi-
mate values and the machine fitting shown in the illustrations may not correspond with standard models. For precise
information on specific machine models and versions, please consult your CASE CONSTRUCTION Dealer.
Reproduction or translation, even partial, is prohibited without written authorization from CNH Industrial America LLC.
Company.
Intended use
NOTICE: do not use the excavator for operations which are foreign to its specifications and not included in this manual
in order to prevent serious injury to persons or damage to the machine. The manufacturer/dealer is not responsible
for damage caused by improper use.
The excavator has been designed to carry out digging and earth moving operations through the use of a bucket.
Operations that involve the use of hydraulic hammers are also possible. Other operations, such as moving suspended
loads, are only possible if the specific variant approved by the manufacturer is present.
Using the excavator and its equipment for different operations, such as towing, transporting and lifting people, is
considered inappropriate and is prohibited.
Electro-Magnetic Compatibility (EMC)
Interference may arise as a result of add ‐ on equipment that may not necessarily meet the required standards. As
such interference can result in serious malfunction of the unit and/or create unsafe situations, you must observe
the following:
• The maximum power of emission equipment (radio, telephones, etc.) must not exceed the limits imposed by the
national authorities of the country where you use the machine
• The electro
‐ magnetic field generated by the add ‐ on system should not exceed 24 V/m at any time and at any lo-
cation in the proximity of electronic components
• The add
‐ on equipment must not interfere with the functioning of the on board electronics
Failure to comply with these rules will render the CASE CONSTRUCTION warranty null and void.
Telematics
NOTE: the CASE CONSTRUCTION SiteWatch™ website (www.casesitewatch.com) will not be accessible until the
CASE CONSTRUCTION SiteWatch™ subscription for this machine is registred by an authorized CASE CONSTRUC-
TION dealer. Contact an authorized CASE CONSTRUCTION for details.
This machine is equipped with a telematics system. This is an asset-monitoring system that combines Internet, cel-
lular, and GPS technologies. A transponder unit is mounted on the equipment that wirelessly communicates with
the user interface CASE CONSTRUCTION
SiteWatch™ at www.casesitewatch.com. Using cellular technology, the
transponder can send equipment data, including location, on/off status, usage and production metrics, diagnostic
data, movement alarms, and unauthorized usage to the interface. The system will help cut costs and keep accurate
records. See the furnished guide for operating your telematics system.
1-2